Submit Your Logo/Design

1. Upload Your Design:

   • Send your logo as a PNG, SVG, or PDF by clicking the "Upload Design" button below.
   • Alternatively, email your design to powersprintdesign@gmail.com.

2. For Gang Sheets:

   • Use the Gang Sheet Creator by clicking the "Create Design" button below.

Logo/Design Requirements

• Avoid Translucent Pixels: DTF printing is not effective with translucent or smokey effects (these are suitable for sublimation only).
• Test Your Design: Place your image on a black background in Photoshop to ensure no translucent areas before uploading.
• No Refunds: Once your order is printed, refunds are not available. It is your responsibility to ensure your design is print-ready.
• Design Adjustments: If adjustments are required by Powers Print & Design, a $25 minimum design fee will apply.

Pressing Instructions

• For Cotton and Polyester Blends:
  • Set your heat press to 315–320°F. (Temperature may vary for different fabrics.)
  • Press for 15–20 seconds with medium pressure.
  • Let the design cool for 10–15 seconds before removing the DTF film.
    • If the image starts lifting, allow more cooling time or repress with increased pressure.
  • For the best finish, press again for 10 seconds using a finishing cover (e.g., parchment paper or a blank 100% cotton white t-shirt).

By placing your order, you acknowledge and accept these requirements.
Questions? Reach out at powersprintdesign@gmail.com or send us a message. Thank you for choosing Powers Print & Design!